10
11
MISTRAL DC
WARNING
: To avoid personal injury or damage, be sure to turn off the power to the main fuse box before wiring.
L:
AC IN 220-240V
N:
AC IN 220-240V
:
Yellow/Green
REMOTE CONTROL CONNECTION
ASSEMBLING
ASSEMBLING
Make sure you have all the components before beginning installation.
To prevent damage, attach themotor to the support rod on a soft surface or use the polystyrene contained
in the package.
EN
EN
Receiver placement:
1/
Open the carton box and take out the fan (fig. 1).
2/
Assemble the support plate on the ceiling using two or
more screw anchors and appropriate washers. Attention:
the provided screw are for wood joist and concrete ceiling.
(fig. 2).
3/
Center the slots on the blades with the heads of the
blades fixing screws and slide the blades so that the head of
the screws are positioned at the end of slot. (fig. 3)
4/
Tighten the screw. (fig. 4)
5/
Remove the screws from connect plate of the motor,
please organize all the wires carefully into connect p.late.
6/
Assemble and align the holes on the back of LED light
to the three screws on the connect plate of motor. (fig. 5)
7/
Then tighten the three screws on the LED plate, connect
the connector together with the motor wire, please make
sure the light kit can’t be moved after tighten the screws.
(fig. 6)
8/
Place the lamp shade on the fan. (fig. 7)
9/
Hang the motor housing on the support plate, and
connect the AC IN L, AC IN N and Earth wire (with
electric tap)(fig.9)
10/
Tighten 4 screws on the support plate to fix the
whole fan.
1
3
5
7
9
2
4
6
8
10
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
Yellow/Green
Yellow/Green
Remote
control
LIGHT L
L
N
LIGHT L
LIGHT N
LIGHT N
