STRUCTURE OF THE VACUUM CLEANER AND GUIDE TO PARTS
INSTRUCTIONS FOR USE
1.
Place the fire prevention filter at the bottom of the engine base.
2.
The filter should be removed and cleaned after each heavy use.
3.
Firmly connect one end of the metal hose with the suction mouth in the tank.
4.
Connect the electrical cable to the outlet.
5.
Place the aluminum tube in the fireplace or stove to suck in the ashes.
6.
Move the suction tube with a slight pressure slowly and evenly over the dirt.
ON
1.
Plug the battery charger and charger into an outlet.
2.
When fully charged, disconnect it from the charger and insert it into the battery slot in
the vacuum cleaner.
3.
Turn the switch to 'I' to turn it on.
4.
Turn the switch to '0' to turn it off.
1. Battery platform
2. Battery connector
3. handle
4. switch
5. Top cover
6. Barrel cap
7. Engine block
8. Engine
9. Engine mount
10. HEPA filter
11. Black paint barrel
12. Metal clip
13. Suction mouth
14. Metal hose
15. Aluminum tube
16. Charger
17. Battery
16
17
