Keithley S530, Manual, Page: 24 / 123

Section 3: LPTLib command reference
S530/S540 KTE Linear Parametric Test Library (LPTLib) User's Manual
3-2 S530-900-01 Rev. E / September 2017
The following table contains a list of valid suffixes, the parameter (function) each represents, and
the units used throughout the LPTLib for that parameter.
Suffix Parameter Unit
c Capacitance Farads
f Frequency Hertz
g Conductance Siemens
i Current Amperes
q Charge Coulombs
r Resistance Ohms
rh Relative humidity Percent
temp Temperature Degree Celsius
t Time Seconds
v Voltage Volts
•
Brackets
[]
are used to enclose optional arguments of a command.
•
Period strings (
...
) indicate additional arguments or commands that can be added.
•
Periods (
.
) indicate data not shown in an example because it is not necessary to help explain
the command.
Categorized command lists
The command descriptions are presented in alphabetical order in the LPTLib commands (on page
3-7) section. The tables that follow contain all of the commands grouped by function, with a brief
description of the purpose of the command and a hyperlink to the full command description.