5-18
Troubleshooting
KPCI-PIO96 User’s Manual
Figure 5-9
PIO Control Panel example
9. On the PIO Control Panel, click the ‘Chn’ channel tab indicated in Table 5-6.
Table 5-6
Which channel tab to click
NOTE
In the following steps 10 through 12, graphical slide switches on the
PIO Control Panel are used for all settings. Each click on the button
of a slide switch toggles the button up or down.
10.Using the ‘Configure’ switches on the PIO Control Panel, configure ports A, B, and C for
output as shown in Figure 5-10.
If you are testing this group of A, B, and C ports:
Then click this tab:
Port group 0 (I/O connector J102)
‘Chn 0..2’
Port group 1 (I/O connector J103)
‘Chn 3..5’
Port group 2 (I/O connector J104)
‘Chn 6..8’
Port group 3 (I/O connector J105)
‘Chn 9..11’
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
