![background image](http://html2.mh-extra.com/html/keithley/7037/7037_instruction-manual_3951659016.webp)
1-3
Instruction manual
The Model 7037 Instruction Manual is three-hole drilled so
it can be added to the three-ring binder of the Model 7001 or
7002 Instruction Manual. After removing the plastic wrap-
ping, place the manual in the binder following the mainframe
instruction manual. Note that a manual identification tab is
included and should precede the Model 7037 Instruction
Manual.
If an additional instruction manual is required, order the
manual package, Keithley part number 7037-901-00. The
manual package includes an instruction manual and any per-
tinent addenda.
Repacking for shipment
Should it become necessary to return the Model 7037 for
repair, carefully pack the unit in its original packing carton,
or the equivalent, and include the following information:
• Advise as to the warranty status of the card.
• Write ATTENTION REPAIR DEPARTMENT on the
shipping label.
• Fill out and include the service form located at the back
of this manual.
Optional accessories
The following accessories are available for use with the
Model 7037:
Model 7011-MTC-2
This two-meter round cable assem-
bly is terminated with a 96-pin female DIN connector on
each end. It will mate directly to the connector on the Model
7037 and to a standard 96-pin male DIN bulkhead connector
(see Model 7011-MTR).
Model 7011-MTR
This 96-pin male DIN bulkhead con-
nector uses solder cups for connections to external circuitry.
It will mate to the Model 7011-KIT-R connector and Model
7011-MTC-2 cable assembly.
Summary of Contents for 7037
