![background image](http://html1.mh-extra.com/html/keithley/7012-s/7012-s_instruction-manual_4015980017.webp)
1-3
1.7.3 Instruction manual
The Model 7012 Instruction Manual is three-hole
drilled so that it can be added to the three-ring binder
of the Model 7001 Instruction Manual. After removing
the plastic wrapping, place the manual in the binder
following the mainframe instruction manual. Note that
a manual identiÞcation tab is included and should pre-
cede the matrix card instruction manual.
If an additional instruction manual is required, order
the manual package, Keithley part number 7012-901-
00. The manual package includes an instruction manu-
al and any pertinent addenda.
1.8
Repacking for shipment
Should it become necessary to return the Model 7012
for repair, carefully pack the unit in its original packing
carton or the equivalent, and include the following in-
formation:
¥
Advise as to the warranty status of the matrix card.
¥
Write ATTENTION REPAIR DEPARTMENT on
the shipping label.
¥
Fill out and include the service form located at the
back of this manual.
1.9
Optional accessories
The following accessories are available for use with the
Model 7012:
Model 7012-ST
This screw terminal connector card
is identical to the one provided with the Model 7012-S
assembly. An extra screw terminal connector card al-
lows you to wire a second test system without disturb-
ing the wiring conÞguration of the Þrst connector card.
Model 7011-KIT-R
This connection kit includes a
96-pin female DIN connector that will mate directly to
the connector on the Model 7012-C or to a standard 96-
pin male DIN bulkhead connector (see Model 7011-
MTR). This connector uses solder cups for connections
to external circuitry. It includes an adapter for a round
cable and the housing.
Model 7011-MTC-2
This two-meter round cable as-
sembly is terminated with a 96-pin female DIN connec-
tor on each end. It will mate directly to the connector
on the Model 7012-C and to a standard 96-pin male
DIN bulkhead connector (see Model 7011-MTR).
Model 7011-MTR
This 96-pin male DIN bulkhead
connector uses solder cups for connections to external
circuitry. It will mate to the Model 7011-KIT-R connec-
tor and Model 7011-MTC-2 cable assembly.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Summary of Contents for 7012-S
