Return to
Common commands
summarizes the common commands used by the Model 7002-HD and
are presented in alphabetical order.
Table 5-1
IEEE-488.2 common commands and queries
Mnemonic
Name
Description
*CLS
Clear status
Clears all event registers, and Error Queue.
*ESE <NRf>
Event status
enable command
Sets the contents of the Standard Event Status
Enable Register.
*ESE?
Event status enable query
Request the programmed value of the Standard
Event Status Enable Register.
*ESR?
Event status
register query
Request the programmed value of the Standard
Event Status Register and clears it.
*IDN?
Identification query
Request the manufacturer, model number, serial
number, and firmware revision levels of the unit.
*OPC
Operation complete
command
Sets the Operation Complete bit in the Standard
Event Status Register after all pending com-
mands have been executed.
*OPC?
Operation complete query
Places an ASCII “1” into the output queue when
all pending selected device operations have
been completed.
*OPT?
Option identification query
Request the assigned model number for all slots.
*RCL <NRf>
Recall command
Returns the Model 7002-HD to the setup config-
uration stored in the designated memory loca-
tion.
*RST
Reset command
Returns the Model 7002-HD to the *RST default
conditions.
*SAV <NRf>
Save command
Saves the current setup configuration to the des-
ignated memory location.
Summary of Contents for 7002-HD
Page 80: ...A Specifications...
Page 82: ...B Status and Error Messages...