Model 2657A-LIM-3 LO Interconnect Module
2
PA-1063 Rev. A / March 2012
Mounting the Model 2657A-PM-200 protection modules onto the
Model 2657A-LIM-3
The Model 2657A-PM-200 protection modules may be mounted to the top or bottom of the Model 2657A-LIM-3.
The assembly drawings below show top-side mounting.
A formed bracket and three long screws are supplied with the Model 2657A-LIM-3. Use the bracket and screws to
secure the protection modules to the top of the Model 2657A-LIM-3. The screws should only be tightened enough
to keep the protection modules secure. Do not overtighten.
The protection modules may instead be attached to the bottom surface of the Model 2657A-LIM-3 in the same
fashion.
Figure 2: Mounting protection modules onto the Model 2657A-LIM-3
Figure 3: Finished bracket assembly
