2
Installation
2-1
2.1
Introduction
This section includes information on installing the Model
1801 in the Model 2001 Multimeter and making power
supply and output connections.
This section is arranged as follows:
2.2
Card configuration:
Discusses the overall configu-
ration of both the preamplifier module and the
power supply card.
2.3
Power supply card preparation:
Covers connect-
ing the power supply cable to the card and routing
the output leads through the cable clamp.
2.4
Card installation and removal:
Gives the proce-
dure to install the power supply card assembly in
the Model 2001 Multimeter and describes how to
remove the card.
2.5
Connections:
Covers the basics for connecting the
power supply to the preamplifier module, as well as
multimeter input connections and analog output
connections.
2.6
Operating considerations:
Outlines use of the ther-
mal isolation enclosure and discusses minimum
operating distance.