20
DOC06387 Rev. C
OWNER / OPERATOR MANUAL
KICD - Container Drive
OWNER / OPERATOR MANUAL
KICD - Container Drive
4.3 Bolt Torque Requirements
Description
Size
Quantity
Torque Values
Tube Clamp Bolts
M6 CL8.8 HCS
Varies
Snug
* Cylinder Pack Bolts
(Requires blue Loctite
M16 CL10.9 HCS
22
150 ft.-lbs
[205 N·m]
Switching Valve Bolts
M10 CL10.9 HCS
3
61 N·m
[45 ft.-lbs]
* Rod Clamp Bolts
(Requires blue Loctite)
M16 CL10.9 HCS
4 per Rod
150 ft.-lbs
[205 N·m]
Bearing Block Bolts
M10 CL10.9 HCS
8
Snug **
(Do Not Overtighten)
* Floor Bolts (Flat Head)
(Requires red Loctite)
M12 CL10.9 FHCS (90°)
Varies
113 N·m
[83 ft.-lbs]
* Bolts installed using thread lock should be checked using a setting that is 7 N·m [5 ft-lbs] less than
the above specified value. If the bolt moves then you should remove it, clean it, apply new loctite to the
threads and torque it to the full
specified value.
** Over tightening the barrel clamp bolts can deform the cylinder barrel shape causing the system to not
function properly.
Bearing Block
Bolts M10 (8)
Rod Clamp
Bolts M16 (12)
Cylinder Pack
Bolts M16 (22)
Switching Valve
Bolts M10 (3)
Floor Bolts
