INSTALLATION / OPERATION & PARTS CATALOG
CleenSweep
®
Hydraulic - CSH
9
DOC03668 Rev. G
WARNING:
Always disconnect hydraulic and electric power to the trailer and follow lock out/tag
out safety procedures before entering the trailer or working on the CleenSweep
®
Tarp System
components. Failure to do so may result in serious injury or death due to the large forces involved
with the CleenSweep
®
Tarp System.
3.4 Hydraulic Winch & Strap Roller Installation
3.4.1 Option 1: Low Mount - Winch below front slope shield, strap roller near top of wall
Low Mount - (Winch and manifold mounted below the front shield) Requires the use of the strap roller
assembly mounted near the top center of the front wall.
3.4.1.1. Winch Installation Below Slope Shield
NOTE:
Front wall of trailer may need to be reinforced to withstand the forces created by the winch.
1. Locate and mark a centerline up the front wall of the trailer.
NOTE:
It is crucial that strap
roller and the roll of strap on the winch is mounted in the absolute center of the trailer. If the
winch is not mounted square, it will put uneven pressure on the tarp strap and the system
will not function properly.