Keith McMillen Instruments QuNexus RED, User Manual

Page: 31 / 49

Q
u
N
exus
e
diTOr
31
Q
u
N
exus
2.0
4.7.3.2 led r
efresh
M
Ode
“LED Refresh Mode” allows you to set the behavior of the LEDs�
• Normal - LEDs behave normally, lighting up and responding to Remote LED messages as expected�
• Control Only - Only the LEDs on the Side Buttons will light up� The Keyboard LEDs will not light when
touched or respond to Remote LED Control� LEDs will still light up normally in Preset Select and Live
Edit Modes�
• All Off - None of the LEDs will light� The Keyboard LEDs will not respond to Remote LED Control�
LEDs will still light up normally in Preset Select and Live Edit Modes�
LED Refresh Mode settings save with the current preset, so make sure to save and send your preset to
QuNexus in order for this option to take effect� All of the Factory Presets use Normal mode�
4.7.3.3 p
er
k
ey
s
eNsiTiviTy
You can adjust the sensitivity of each key individually� To do this, select “Per Key Sensitivities” from the
“Hardware” drop down menu� Use the sliders to adjust the sensor gain of each key� Move the slider up to
make the key more sensitive, or down to decrease sensitivity� Adjustments made here are added to the
sensitivity setting in the Keyboard Layer�
Adjustments can be made in both places and neither will override the other� Pressing the “Reset All Keys”
button will return all keys to their center positions�
The settings of the Per Key Sensitivities window are not saved per preset, they are applied globally for all
presets� Adjustments to the key sensitivity are sent down to the QuNexus as you make changes in real time�
4.7.3.4 Cv T
riMs
“CV Trims” allows you to adjust the pitch of the CV outs� When you click CV Trims in the
menu, the window to the right will appear� This window provides a way to compensate
for an out of tune synthesizer by allowing you to adjust the QuNexusʼ tuning for each
pitch scaling mode� Use this only if you are unable to adjust the tuning from the
synthesizer itself� Increasing the Trim and offset will raise the pitch of your synth, while
decreasing the values will lower the pitch� The settings in the CV Trims window are
not saved per preset� They are applied globally for all presets and are sent down to
QuNexus as you adjust them in real time�