Keith McMillen Instruments QuNexus RED, User Manual

Page: 21 / 49

s
eQueNCer
/a
rpeGGiaTOr
21
Q
u
N
exus
2.0
3.4.5 usb
aNd
e
xpaNder
Midi r
OuTiNG
To assign the current track’s MIDI output to the USB and/or Expander ports, hold shift and press “Track”,
then while still holding shift, press MPE/CH� Numeric keys 1 (USB) and 2 (Expander) will either blink
(enabled) or be lit at half brightness (disabled), and can be pressed to toggle the routing status�
3.4.6 Cv
aNd
G
aTe
O
uTpuT
r
OuTiNG
The current track’s MIDI messages can be routed to the QuNexus CV and GATE outputs� To enter
the track CV/Gate routing menu, hold the shift key and press/release “CV”� From here you can do the
following:
GATE - While continuing to hold shift, the Gate output can be enabled or disabled by pressing “Gate”,
which will blink when enabled�
CV - While continuing to hold shift, select a CV output using the number keys� When a number key is
blinking, you can select one of the following sources using the corresponding Button/Key, which will
blink when selected:
Button/Key Source
Hold/A = Note Pitch
Velo/B = Note Velocity
Pres/C = Key Pressure
Tilt/D = Key Tilt
Bend = Global Pitch Bend
Gate = Note Gate On/Off
Tempo = Clock (24ppqn)
Press any other key to return to the previous menu�
3.5 a
rpeGGiaTOr
To enable a track’s arpeggiator, hold shift and press/release “Arp”� The track Arpeggiator/Sequencers will
only play back when the system transport is playing� To start playback, hold shift and press/release play, and
now the arpeggiator will play when you hold down keys on the keyboard�
3.5.1 a
rpeGGiaTOr
h
Old
M
Odes
The Arpeggiator has two hold modes - Standard and Toggle�
Standard is the default mode, and behaves similar to other arpeggiators where you can play several
notes simultaneously, let go, and they will continue to play� Playing a different set of notes will clear the
previously held notes, and the new group of notes will be held� In this mode, as long as you are holding
down one of the initial notes you can add and subtract other notes by toggling them off and on� Letting
go of all of the notes will cause them to be cleared the next time a note is played�
Toggle mode is similar to standard mode, except that notes can be toggled on and off without holding
any keys� Held notes are not cleared by pressing new notes�