Keith McMillen Instruments K-Board Pro 4, User Manual

Page: 14 / 30

K-B
oard
P
ro
4 h
ardWare
11
K-B
oard
P
ro
4
T
he Pedal inPUTs
There are two inputs on the back of the device that allow you to connect one sustain pedal and one
expression pedal to send CCs�
T
he
Midi e
xPander
The KMI MIDI Expander allows the K-Board Pro 4 to communicate with traditional 5 pin MIDI hardware�
Using a mini USB cable, connect the mini USB port of the K-Board Pro 4 to the Expand port of the MIDI
Expander� Provide power using a USB power supply into the Power USB B port on the Expander (most all
USB power supplies provide 5V and plenty of amps, but be sure that the power supply provides 5V and
at least 500 mA)� You can also provide power via the main USB port from a connected computer, or a USB
power supply
No further configuration is needed, the MIDI Expander output mirrors the MIDI data that is sent over USB.
Simply connect the MIDI Out of the Expander to the MIDI input of your synthesizer/MIDI hardware� The
MIDI out LED will light yellow indicating that the Expander is passing MIDI data.