Keith & Koep GmbH
Functional specification
MT6N (MT606)
27
von
49
A.7
Ethernet connector
The Ethernet connector is an usually RJ45 connector with the following pin
description.
A.8
JTAG connector (Trizeps)
The JTAG connector to program Flash memory on Trizeps is a 2 row 10 pin header.
The pinout is shown in table 16 on page 27
TABLE 15.
J6 - Ethernet connector
Pin Signal
Description
1
TPETXP
Transmit differential output
2
TPETXN
Transmit differential output
3
TPERXP
Receive differential output
4
nc
not connected
5
nc
not connected
6
TPERXN
Receive differential output
7
nc
not connected
8
nc
not connected
TABLE 16.
J7 - JTAG connector (Trizeps)
Pin Signal
Description
1
TRST
Test interface reset
2
+3V3
Power Supply
3
TDI
JTAG test interface data input
4
+3V3 Power
Supply
5
TDO
JTAG test interface data output
6
GND
Ground
7
TMS
JTAG test interface mode select
8
GND
Ground
9
TCK
JTAG test interface reference clock
10
GND
Ground
