23
HAND GRIPS
TOOLS REQUIRED: Clean throwaway cloth, rubbing alcohol, 5/64” allen wrench, and
LPS cleaner/degreaser (available at auto parts and hardware stores).
THUMB BUTTON GRIP
CAUTION:
USE KEISER GRIPS ON KEISER MACHINES ONLY! USING GRIPS
FROM ANY OTHER PRODUCTS MAY CAUSE SERIOUS INJURY.
1.
Read all the instructions first before beginning any steps.
2.
Leaving the thumb button in place, cut the old style grips from the handles. Remove
“all” tape and adhesive from the handles using LPS – cleaner/degreaser or rubbing
alcohol (alcohol will require extra work to remove all traces of adhesive).
NOTICE:
DO NOT GET ALCOHOL OR DEGREASER IN THE THUMB BUTTON.
CAUTION:
FAILURE TO REMOVE ALL ADHESIVE FROM THE HANDLES
MAY CAUSE THE GRIP SLEEVE TO SLIP, CAUSING BODILY INJURY TO
PEROSNS ON OR AROUND THE EQUIPMENT.
3.
Apply alcohol inside the grip sleeve until the grip sleeve is completely coated.
4.
Slip on the grip collar then slip the grip sleeve over the handle shaft until the grip
sleeve is on far enough to install the end cap.
NOTICE:
IF YOU HAVE ANY
PROBLEMS SLIDING THE GRIP SLEEVE ONTO THE HANDLE SHAFT,
APPLY A SMALL AMOUNT OF ALCOHOL TO THE SHAFT FOR
LUBRICATION.
Summary of Contents for Keiser 300
Page 1: ...Keiser 300 Air 300 Parts and Maintenance Manual...
Page 3: ...3...
Page 5: ...5...
Page 6: ...6...
