19
3.
Remove the shaft from the bracket or the collar from the shaft, and tap the spring pin
through and out of the shaft.
NOTICE:
ALWAYS REMOVE THE PIN FROM THE
SHAFT IMMEDIATELY. ACCIDENTAL INSTALLATION OF A SECOND PIN
WILL DAMAGE THE MACHINE.
SPRING PIN REPLACEMENT:
1.
Check the hole in the shaft to make sure the old pin has been removed. Assemble the
shaft in the bracket or grip collar on the shaft.
2.
Tap the new spring pin into the bracket or collar until the end of the pin is flush with
the outside. Be careful not to damage chrome.
NOTICE:
SEE THE SPECIAL INSTRUCTIONS, ADJACENT TO THE PARTS LIST
FOR THE ROLL PIN INSTALLATION ON THE FOLLOWING MACHINES:
SQUAT, MILITARY PRESS, SHOULDER SHRUG, LAT PULL DOWN, AND LEG
PRESS.
TOOLS REQUIRED: large screwdriver, 5/16 drift punch and a hammer
The seated Chest Press, Military Press, Tricep, Upper Back and Leg Press use a steel
shaft to lock the exercise arms together for bilateral exercise. If this shaft must be
removed for any reason, follow this procedure.
Summary of Contents for Keiser 300
Page 1: ...Keiser 300 Air 300 Parts and Maintenance Manual...
Page 3: ...3...
Page 5: ...5...
Page 6: ...6...
