AIR250 ABDOMINAL
|
OPERATION MANUAL
08
INSTALLATION AND PLACEMENT
TRAINING SPACE
Figure 4. Training Space for the Air250 Abdominal
The equipment footprint is 37 inches x 33 inches (940 mm x 838 mm). The minimum recommended free space around the
equipment is 24 inches (610 mm) for the front and sides.
Figure 3. How to Connect the Equipment to
the Keiser Air Supply
Note: Additional Free Space may be required to accommodate mobility device access.
No assembly required. Place the Air250 Abdominal on a flat, level surface. Make sure the base of the frame makes full
contact with the floor. If gaps are present, relocate the equipment to an even surface.
CONNECT THE EQUIPMENT TO THE KEISER AIR
SYSTEM
WARNING: Never connect equipment to an air
source capable of exceeding 120 psi / 8.27 bar.
Over pressurizing Keiser pneumatic equipment may
cause tubing to burst, breakage of equipment,
abnormal operation, or serious injury. Use only clean,
dry, regulated compressed air at the rated pressure
range of 100–120 psi / 6.89–8.27 bar.
1. Plug the Compressor into the appropriate power
source to power the Compressor ON
(allow the
Compressor to build up to a minimum of 100 psi /
6.89 bar; Keiser Compressor and Keiser Air System
not included, sold separately)
.
2. Connect the 1/4-inch Quick Disconnect (QD) from
the equipment into the Keiser Air Supply
(see
Figure 3)
.
Keiser Air System
(floor or wall air outlet)
Direct-connect to
Keiser Small Air Compressor
Keiser
Large Air Compressor
Keiser
Small Air Compressor
1/4-inch QD
FREE AREA
FOOTPRINT
24 inches
(610 mm)
24 inches
(610 mm)
24 inches
(610 mm)
37 inches
(940 mm)
33 inches
(838 mm)
