T-GPS User Manual Version 1.2 | 11
4.
Module Descriptions
4.1
Power Module
The Power Module provides the power supply for the T-GPS3000, the
layout is as the diagram below shows.
A) ON/OFF: to power on or off the GPS.
B) Fuse: 5A fuse is inside (
Note: The unit should be powered off when
replacing the fuse).
C) Terminals:
① The terminals and
- are for the power supply.
② Earth this device with the terminal marked
4.2
Signal Input (Antenna)
This Module is connected to the antenna, to provide the satellite signal.
Refer to section 6.4 for Antenna installation.
