T-GPS User Manual Version 1.2 | 10
•
DCF77 Code: since this code is used rarely, it only is output from a Dry Contact.
T-GPS has 7 blank modular spaces for the various optional modules. However, for
power consumption reasons, the maximum number of TTL modules is limited to three,
the maximum number of 422/485 is also three and IRIG-B has a maximum of four
modules.
If T-GPS is used as a master, the mandatory modules are the Power Supply module, the
Alarm module, the Antenna module and the Signal Output module (to slave). Leaving 6
blank modules for other options.
If used as a slave, the mandatory modules are two IRIG-B IN modules (for redundancy),
one Power Supply module and one Alarm module. There will again, be 6 blank modules
for other options.
3.5
Customisation
T-GPS3000A is configured using a selection of modules and the outputs can be modified by
adding additional modules as required.
The Dry Contact Output Modules can have maximum of twelve outputs, each can be configured
as 1PPH, 1PP30M, 1PP10M, 1PPM, 1PP30S, 1PP10S, 1PPS, or event outputs.
The Serial Output Modules can have a maximum of four RS232 or RS422 outputs.
The IRIG-B AC Output Module can have maximum twelve outputs, with adjustable amplitude.
The TTL Output Module can have maximum of twelve outputs.
The Differential Output Module can have an RS422 output, pulse output, each can have
maximum of 6 outputs.
Customers should specify the required modules at the time of ordering.
