BrewZilla 35L - Gen 4 Instruction Manual
Page
4
of
31
Last Updated 22/03/2022 16:53 PM
The Gen 4.0 BrewZilla is a complete all in one, all grain home brewing system for those who
want to take the first step in all-grain brewing or simply want to upgrade their system
allowing them full control of their batch from start to finish using Wi-Fi connectivity.
The Gen 4.0 BrewZilla can be used with no Wi-Fi connection using the detachable controller
allowing temperature steps to be set and the pump operated manually through the
controller. However, to utilise the full range of functions of the Gen 4.0 BrewZilla we would
suggest connecting your controller to your Wi-Fi and registering it on the RAPT Portal.
This portal allows you to track, record and monitor your brews online and control your
brewery remotely through a Wi-Fi connected device.
The RAPT Portal gives you complete remote control over your brewery and makes the whole
brewing process easier with the ability to pre-heat your strike water remotely or set up push
notifications for hop or adjunct additions, no more phone timers or hand written notes.
Everything controlled and logged easily through the portal.
Registering your BrewZilla Gen 4.0 to the RAPT Portal is quick and easy and requires the
steps below to be followed. If you intend to only use the controller manually skip ahead to
the assembly instructions.
BrewZilla Digital Temperature Controller