Kegel FLEX 17-5701, Operator'S Manual

Page: 102 / 303

90
System Settings Cleaning Menus
The following are the Change Pattern/System Settings that relate to the cleaning of the lane.
All System Settings adjustments are individual to the pattern selected and the below
information will vary based on whether the lane machine has the Cleaner Tank upgrade or
not.
With Cleaner Mixing System upgrade (dual tank)
The Flex with the Cleaner Mixing System upgrade allows the
operator to mix the cleaner at the desired ratio as the machine
operates. Press on the menu for Mixing Ratio’s to advance to the
screen to choose a preset.
NOTE:
IF YOU ARE USING A SUPER CONCENTRATE CLEANER, AND
THE MACHINE HAS SAT IDLE FOR MORE THAN A WEEKS TIME, IT IS A
MUST TO INSPECT THE TUBING LOCATED IN THE CLEANER PUMP. THERE IS A CHANCE
THAT CLEANER HAS TURNED TO A GEL AND CAN CAUSE POTENTIAL BLOCKING.
REFER TO CHAPTER 1 FOR LONG TERM STORAGE
From this screen you will be able to set your ratio for
cleaning. You can choose between normal concentrate
cleaners such as Defense C, or a super concentrate
cleaner such as Defense CX4 and Defense CX4-S.
Simply press the ratio on the screen shown the left and
the lane machine will mix for you. Once the correct ratio has
been chosen, you can press Send to ALL 30 Patterns.
NOTE:
Once the ratio has been set, you must go to the TEST OIL CLEANER PUMP VOLUME
screen and perform a test!
Press on GO TO BACKEND CLEANING MIX to change cleaning
ratio on the backend of the lane. In this screen you can choose
where and at what ratio you want to change to. When the
machine has almost reached its last Squirt Distance the
cleaning Ratio will return to the normal ratio and dispense the
last of the mix change and be set up for the next lane to
dispense the proper mix for the front end of the lane.