Kegel 17-5900, Operation Manual

Page: 26 / 167

13
By pressing MACHINE SETTINGS, you will arrive at the screen to adjust your buffer brush
functions.
ADVANCE BUFFER DROP
is used to fine tune where
the buffer brush starts to lower in reverse on the
way back to apply the reverse oil. Ideally, if the
‘buffer brush start in reverse location’ is the same
as the pattern distance, then the buffer brush
should start up again at that point. If not, raise or
lower the Advance Buffer Drop number until the
right distance is achieved.
Want a nice straight oil line at the end of your pattern? If so, turn the BUFFER UP STOP
DELAY function ON. The machine will stop at the end of the pattern, lift the buffer
brush and then continue on. VALUE OF 1 TO TURN OFF?
PLEASE BE AWARE ! This function can cause more wear on the drive system so it is best
to use this when the machine is traveling less than 26 IPS at the end of the pattern
before abruptly stopping.
SET PASSWORDS
is used to prevent unauthorized
operation of the machine. The lane machine will
come with the passwords all set to zero allowing
you to customize a 4 digit passcode, such as the
1951 shown in the CHANGE PATTERN and PATTERN
OVERRIDE lines.
By pressing on the number to the right of whichever
passcode you want to change, a numbered
keypad will display allowing you to chose a 4 digit
customized passcode.