KEFFNER AIR AIR 60, Manual And Warranty Card

Page: 36 / 43

2 6 2 5
1. 2. Open app and press “+” to
add device, or use the add
device buton.
3. Select the type of device as “Air
Purifier” within the Home
Appliance tab.
Press on the AP mode button in
the top right of the screen.
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the wifi light
flashing once per second. If not follow the instructions for changing the wifi connection mode.
Also ensure your phone is connected to the wifi network. (We advise turning mobile data off
during setup).
4. 5. 6. Enter your wifi password and
press confirm.
Ensure the wifi light on the
air purifier is slowly flashing
(once per three seconds),
then press on the orange
button at the bottom of the
screen to confirm.
Go to network settings in your
phone and connect to the
“SmartLife-xxxx” connection. There
is no password to enter. Then
return back to the app to complete
setup.
This will then transfer the settings to the air purifier.
Once the connection process has completed, go back to the network settings on your phone to ensure your
phone has reconnected to your wifi router.