10
11
Operation Instructions for KTA14126 Wireless Remote
Your wireless remote will operate the winch from up to 100+ feet depending on
weather conditions as rain, snow or fog can shorten the distance.
1. To activate the sender PRESS BOTH the “Winch In” (A) (Arrow towards the winch
drum) and “Winch Out” (B) (Arrow facing away from the drum) buttons at the same
time for 5 seconds or until the indicator light (C) turns red. Refer to
Fig.1
2. Plug the receiver (
Fig. 2
) into the female plug receptacle on the top of the solenoid
box on the winch (Same place you would normally plug your handheld switch
control)
Fig. 3
3. You are now ready to winch. When you press either the “Winch In” or “Winch Out”
PLEASE NOTE
– If the switch is not used for 5 minutes it will go into sleep mode for
safety and also extend battery life. To revive the sender you will need to repeat step 1.
Wireless remote operation
FIG. 1
FIG. 2
FIG. 3
C
A
B
If you ever have to replace your senders or receiver you can program the new units to
function with the old units by following the procedure below.
1. Unscrew and remove the two metal screws at the plug side of the receiver.
Fig. 4
2. Gently pull out the receiving assembly.
Fig. 5
3. MAKE SURE THE WINCH IS IN THE FREEWHEEL POSITION
4. Plug the assembly into the female plug receptacle on top of the winch solenoid control
box. The same position as shown in
Fig 3
.
5. Push down on the Smart Button.
Fig 6
6.
Fig.1
) button in for at
least 2 seconds before releasing and then push the “Winch In” (A in
Fig. 1
) button in for
two seconds before releasing. The movement of the motor will indicate that you have
successfully reprogrammed the senders.
7. Once you have determined that the units are working, unplug the receiving assembly
from the control box and carefully slide it back into the housing and secure it with the
two screws.
8. You are ready to use the reprogrammed Wireless. **Remember that your winch is in the
freewheel position.
Reprogramming senders to a receiver
FIG. 4
FIG. 5
FIG. 6
Smart Button
Operation Instructions for KTA14126 Wireless Remote
