2
3
The Danger, Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the operator.
Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. This notation is also used to alert against unsafe practices.
Note:
Indicates additional information in the installation and operation procedures of your winch.
KW7.5RM 7500 lb 12V DC Electric Winch
PLEASE READ ALL SAFETY PRECAUTIONS AND WARNINGS BEFORE
INSTALLING AND USING THE WINCH!
You will need this manual for the safety warnings and cautions, assembly instructions, operating procedures,
maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference.
THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
Winch Dimensions and Mounting Bolt Pattern
FIGURE 1
THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
KW7.5RM SPECIFICATIONS
P
art Number:
Rated Line Pull:
Motor - Series Wound:
Control:
Switching:
Gear Train:
Gear Reduction:
Clutch (Freespooling):
Brake:
Wire Rope:
Drum Diameter/Length:
Fairleads:
Battery Leads:
Battery:
Application:
Finish:
Weight:
Warranty
KW75122 - with Wireless
7,500 lbs., 3,402 kg.
4.5 hp 12V DC
Handheld Pendant Switch on 15' Lead with Built-in High Density Light
High Duty Cycle Integrated Sealed Solenoid Pack and KTA14126 Wireless
High Efficiency 3-Stage Planetary Gear Set
180:1
Lift and Turn
Mechanical Automatic
72' (22.00 m) of 5/16ths (8.0 mm) Diameter Galvanized Wire Rope with
Looped Thimble, Latched Clevis Hook and Red Warning Area.
Diameter - 2.5" (63.5 mm) / Length - 6.6" (152 mm)
4-way Roller
2 Gauge: Front Mount 2’ motor leads with Quick Connect and 6’harness with Quick Connect
Minimum 650 CCA
General Utility Load Recovery/Trailer, Truck, Tractor, Equipment
High-Gloss gray Powder Coat over Undercoating
76 lbs. / 35 kg.
Limited Lifetime: See Warranty
!
!
WARNING
Thank you for purchasing your KEEPER
®
Winch.
PLEASE READ ALL INSTRUCTIONS, PAYING SPECIAL ATTENTION TO THE
SAFETY INSTRUCTIONS.
Your KEEPER
®
Winch has been designed and manufactured to provide years of trouble-free operation.
When requesting information in regard to this winch, please give the following information:
Winch Part #____________________ and Serial number___________________________________.
(Please write down this information here for future reference.) (Found on Motor Housing)
Please read and understand this Owner’s Manual prior to installing and operating this product.
PAY PARTICULAR ATTENTION TO THE GENERAL SAFETY INFORMATION.
Your Winch is a powerful machine. If used unsafely or improperly, there is a possibility that property damage and/or
personal injury can result. Your safety ultimately depends on your caution when using this product.
!
!
DANGER
!
!
CAUTION
Safety Precautions
Designed for Utility Recovery, and General Utility Winching Applications.
THIS PRODUCT IS NOT INTENDED FOR LIFTING/HOISTING
!
!
CAUTION
Introduction
Save this Manual
6.6” (166.5mm)
17.15” (435.5mm)
5.34” (135.5mm)
4-M10
6.3” (160mm)
4.5”
(114mm)
7.56”
(192mm)
3.23”
(82mm)
9.79”
(238.7mm)
64
10.36”
(263.15mm)
MOUNTING BOLT PATTERN
6.6” (166.5mm) x 4.5” (114mm)
