8
Operating steps (Use robot)
Please follow the following steps to operate your robot.
Installation
1. Robot mapping
Before moving, the robot needs to check the surrounding environment. It stores and identifies its
operating environment in the form of a map. This step is called mapping. (Such step is completed
by professional and technical personnel without user's operation)
In case of significant changes in the indoor operation environment of the robot (such as
redecorating, moving the robot to a new place for operation, or rearranging indoor items), please
call our Customer Service at 400-9651-808 to rebuild the map.
Power on
1. Power on/off
The power switch is located on the lower surface of the gap (near liquid injection port) in the laser
layer of the robot. You may find the power switch in the position shown in fig. 3. Start the robot by
pressing the power switch upward with your finger. It will take about 40s to start the system before
operation.
If you want to turn off the robot, perform the same action as you start the robot. After turn off the
power switch, the machine will be powered off immediately.
