12
10
11
3
Combo port "0"
Port for Internet connection, combining
a RJ-45 connector for Ethernet cable and
a SFP slot for a fiber optic connection via SFP
module (sold separately). It is possible to use
only one connection type at the same time.
If an SFP module is plugged in, the RJ-45
connector will be disabled. The connection
that is currently active can be identified by
the indicator located above the port.
4
DC power connector
Connector for the DC power adapter
from Keenetic package. The Keenetic
is designed for continuous operation and
does not need to be powered off daily.
5
Indicator (Status)
On
— the Keenetic is ready for operation.
Off
— the Keenetic is turned off.
Flashing slowly
— the Keenetic is being
rebooted or is updating its operating system.
Flashing for 2 seconds, then steady on
—
FN button or button is pressed; the
function assigned to the button was started.
Flashing for 2 seconds, then off for 2 seconds
—
FN button or button is pressed; the function
assigned to the button was stopped.
6
Indicator (Internet)
On
— the Internet connection
has been established.
Off
— there is no Internet connection.
