Description
Value
Argument
Source port in the
or
header.
Integer
source-port
The end of the source range of
ports.
Integer
source-end-port
src-port-operator
Operator “less” to compare the
port with the specified
source-port
.
lt
Operator “equal” to compare the
port with the specified
source-port
.
eq
Operator “greater” to compare the
port with the specified
source-port
.
gt
The destination address in the
header of IP-packet.
IP-address
destination
Mask to be applied to the
destination address in the header
IP-mask
destination-mask
of IP-packet before comparison
with
destination
. There are two
ways to enter the mask: in the
canonical form (for example,
255.255.255.0
) and in the form of
prefix with bit length (for example,
/24
).
Destination port in the
or
header.
Integer
destination-port
The end of the destination range
of ports.
Integer
destination-end-port
dst-port-operator
Operator “less” to compare the
port with the specified
destination-port
.
lt
Operator “equal” to compare the
port with the specified
destination-port
.
eq
Operator “greater” to compare the
port with the specified
destination-port
.
gt
Example
(config-acl)> deny icmp 192.168.0.0
255.255.255.0 192.168.1.1 255.255.255.0
ACL rule added.
History
Version
Description
The access-list deny command has been introduced.
2.00
Command Reference Guide — Keenetic Lite (KN-1310)
32
Chapter 3 Command Reference
Summary of Contents for Lite KN-1310
