KeeNetic Lite KN-1310 Command Reference Manual Download Page 155

Page: 155 / 320

3.20.3 ip dhcp pool debug

Description

Add debug messages to the system log. By default, the setting is disabled.

Command with no prefix disables debugging.

Prefix no

Yes

Change settings

Yes

Multiple input

Synopsis

(config-dhcp-pool)>

debug

(config-dhcp-pool)>

no debug

History

Version

Description
The ip dhcp pool debug command has been introduced.

2.01

3.20.4 ip dhcp pool default-router

Description

Configure default gateway IP-address. If not specified, the address of the

Ethernet-interface determined automatically for a given range

range

will be

used.

Command with no prefix cancels the setting.

Prefix no

Yes

Change settings

Yes

Multiple input

Synopsis

(config-dhcp-pool)>

default-router

‹

address

›

(config-dhcp-pool)>

no default-router

Arguments

Description

Value

Argument

Default gateway address.

IP-address

address

Example

(config-dhcp-pool)> default-router 192.168.1.88
pool "test_pool" router address has been saved.

History

Version

Description
The ip dhcp pool default-router command has been

introduced.

2.00

Keenetic Lite (KN-1310) — Command Reference Guide

155

Chapter 3 Command Reference

Summary of Contents for Lite KN-1310

































































































































































































































































































































Search results

Summary of Contents for Lite KN-1310

Reviews:

Brands by name

Popular brands

KeeNetic Lite KN-1310, Command Reference Manual

Search results

Summary of Contents for Lite KN-1310

Reviews:

Brands by name

Popular brands