Evolution3 FreeHand Installation
Manual – Calibration
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 4 of 4
Use the 2.5mm Allen (hex) key in the Allen (hex) screw on the
left hand end of the cutter to adjust the cutter bar sag. Turn
clockwise to raise the clamp in the centre.
