System Overview
2
TESTING & CERTIFICATION
Tested in accordance with the following
(See Specification Section for full details) :-
EN ISO 14122: 2016 Part 3
KEE WALK
®
Step Over systems do not require physical fixing
to the building’s structure. The complete system’s design,
manufacture, testing and installation have been internally
assessed and designed in accordance with EN 14122-3
European Standards.
OFFICIAL DOCUMENTATION
All Systems comply with the following: - Work at Height
Regulations.
- HSG-33, Health & Safety in Roof work
- HSE INDG 284- Working on Flat Roofs
- BS EN 516: 2006
AESTHETICS
The smooth lines of the standard galvanised finish can be
further enhanced by the application of powder coating to EN
13438.
MATERIALS
Steel tubing to EN 10255. 42.4mm diameter tube x 3.2mm wall
thickness. All steel components galvanised to BS EN ISO 1461.
All fixings are hot dipped galvanised to BS EN ISO 1461.
All cast clamps have Threadkoat applied to all tapped holes.
All grub screws are carbon steel and have Kee Koat protection
applied to ensure minimal maintenance.
Where tubing is cut on site zinc rich paint is applied to the cut
end of the tube.
Powder Coating to EN 13438.
KEE WALK tread is manufactured in high grade nylon/
aluminium incorporating raised textured sections. Open tread
design ensures water drains away
SYSTEMS DISTRIBUTORS
KEE WALK
®
Step Over is available as a supply and installation
service or component supply only. Products are available from
Kee Safety directly or one of its licensed distributors.
