Kee Walk Mini Step Over
INSTALLATION
Installation should be carried out by at least 2 competent
persons. Step Over units can be heavy and care should be
taken at all times.
You will need the following in order to install the Mini Step
Over.
Tool list:
1No 13mm socket
1No 13mm spanner
¼” Hex key socket
Torque wrench 10- 60 Nm approx
Small magnetic level
MINI STEP 200MM CLEARANCE -
FIXED
Designed to clear obstacles up to 200mm in height, this
Mini Step Over provides safe access over smaller hazards
STMFX2003
- 473mm clearance. Weight 14.05kg
STMFX2004
- 713mm clearance. Weight 15.55kg
STMFX2005
- 963mm clearance. Weight 17.05kg
MINI STEP 400MM CLEARANCE -
FIXED
Designed to clear obstacles up to 400mm in height, this
Mini Step Over provides safe access over larger hazards
STMFX4003
- 473mm clearance. Weight 36.24kg
STMFX4004
- 713mm clearance. Weight 37.34kg
STMFX4005
- 963mm clearance. Weight 39.24kg
MINI STEP 200MM CLEARANCE -
FREE
STANDINGG
With recycled PVC weighted bases to eliminate the need to fix the
unit to the roof, this unit is designed to clear obstacles up to 200mm
in height.
STMFS2003
- 240mm clearance. Weight 65.63kg
STMFS2004
- 490mm clearance. Weight 67.13kg
STMFS2005
- 740mm clearance. Weight 68.63kg
MINI STEP 200MM CLEARANCE -
FREE
STANDINGG
With recycled PVC weighted bases to eliminate the need to fix
the unit to the roof, this unit is designed to clear obstacles up to
400mm in height.
STMFS2003
- 433mm clearance. Weight 83.93kg
STMFS2004
- 673mm clearance. Weight 85.43kg
GENERAL
Two options are available, free standing, which the unit stands
on two 26kg base weights, or fixed, which can be attached to
suitable securing surfaces.
KEE WALK Mini Step Over Fixed systems require physical fixing
to the buildings structure.
KEE WALK Mini Step Over free standing systems are safe for
wind speeds in excess of 86mph.
TESTING
All modules meet the requirements of EN 516 : 2006.
Modules STMFS200* and STMFX200* also meet the
requirements of EN 14122:3 - 2016.
MINI STEP MODULE KITS
Low maintenance,
KEE WALK
Mini Step Over modules are made from Galvanised steel, Aluminium extrusion and reinforced Nylon treads and are tested and
compliant to EN 516 Class 1-C.
Available as kits, the Step Overs are supplied flat packed, but are quick and easy to assemble.
2 Height clearances options, 200mm and 400mm
3 lengths available, 3, 4 and 5 tread options
Two fixing options, free standing and fixed
14
DANGER TO LIFE!
Establish that the is installed correctly!! Failure to
do so could result in death or serious injury.
Recycled PVC base weights weight in excess of 26KG
each! Take care when handling.
