KEDDY Christineberg, Installation Instructions Manual

Page: 9 / 20

- 7 -
12. Install element 6 right way round with matching gas -
ket and four gasket spacers, in the same way as element
5.
Also install one
element 7
right way round with match -
ing gasket, but wait with the gasket spacers. They are
installed first in step 14.
13. Apply a string of silicone (red) around the top join of
the bottom safety case. Assembly the top safety case on
top of the bottom one. Lock the safety cases together, with
the three fasteners. Check the joint is sealed all round.
14. Push down four round gasket spacers evenly distrib -
uted around element 7.
Install three additional element 7 pieces, one element
8 piece, and one element 9 piece, the right way round,
with matching gaskets and spacers, in the same way as
for element 5.
Install element 10 . Push down the last of the two thick
(Ø15 mm) fireproof rope seals around element 10, so it is
sealed. Place one or more sealing rings on top, until you
are at the same level as the upper edge of the safety case.
Silicone