Video device Management
32
See section “Appendix 1” for network access of devices other than multicast devices.
4.3
Video device management
Enter into the device management interface from the main menu, and select the device:
♦
Delete device
♦
Change device
♦
Change name
♦
Monitor status
♦
Restart device
♦
Configuration settings
Notice: please operate the video device when it is online. You are suggested to change device instead of delete.
4.3.1 Modify Registration Address
You can change the address of a registered device (except the internal device), conduct the following
operations:
1
）
Enter the interface for adding devices;
2
）
Select the device from the devices list;
3
）
Click
Modify Address
on the lower part of the interface;
4
）
Enter the address of the registered surveillance platform again or directly register to the current
NVR platform on the open interface.
4.3.2 Replace a Device
The internal devices can be replaced online instead of delete. Replace device B with A:
Enter into
add device
interface, and select device A in the list, then click
change device
;
Select the device B to be replaced in the popup windows and confirm it;
A is add to NVR, and B is delete at the same time.
4.3.3 Device group
NVR2860 device list divided into encoder and decoder group, and group management is supported.
Create a new group in encoder or decoder group.
Summary of Contents for NVR2820L
Page 1: ...NVR Administrator Guide...
