NVR Installation Guide
13
2 NVR Installation Guide
The NVR must be put in a dry and well-ventilated environment with good dustproof, anti-interference and
lightning-protection capabilities.
2.1
Working Environment
Placement
Place on a horizontal table or mounted on a rack.
Power
Working voltage: 100V – 240V, frequency: 50 Hz – 60 Hz.
Alarm Input/Output
Alarm input: switch
Alarm output: switch, normally open
Please pay attention to the type of the alarm input device. Refer to
Chapter 6 for details.
Temperature
0
℃～
60
℃
Humidity
10%
～
85%
（
non-condensing
）
Altitude
-60
～
5000m
2.2
Installation steps
Following this flow to install the NVR surveillance system:
Step1
Preparation
components
Section 0 describes necessary components, including
compulsory and optional units.
Step 2
Install hard disk
Install the hard disk to store records.
Step3
Connect cables
Section 2.7, connect cables necessary.
Step4
configure network
Section chapter 3, set the network parameters according the
reality.
Step 5
Manage the video unit
Section chapter 4
，
add device, modify, set parameters, etc.
Please refer to chapter 5 for disk management.
Step6
NVR Station access
See chapter 7 for NVR Station.
Summary of Contents for NVR2820L
Page 1: ...NVR Administrator Guide...
