NVR Installation Guide
21
Steps:
1
）
Run IPCSearch in the attached CD;
2
）
Select NVR with the default IP address in IPCSearch;
3
）
Click
to modified the network parameters if necessary;
4
）
After modified the parameters NVR2820L will restart and IPCSearch will re-find it, then double
click it or click
, you will login NVR Station
——
the NVR Client;
5
）
After login NVR Station, you need add IPC in surveillance list in the left side.
Notice:
1: The system requirement of PC which run NVR Station, please refer to Section “7 NVR Station”.
2: All the operation of NVR2820L need in the NVR Station, the function of NVR Station please refer to NVR Station Help, in
this document we’ll not repeat it.
2.5.2 Other NVR
Figure 2-6 Wiring of NVR2820 Wizard Configuration
After finish connecting cables, turn on the power and press the power switch power
ON
.
For first use, the
Configuration Wizard
interface opens automatically,
Alternately, from
Main Menu
Æ
System
Æ
Wizard
.
In the
Wizard
, you may configure:
♦
Network information
♦
Hard disk partition
♦
Networking settings
♦
Record Settings
♦
Alarm settings
Summary of Contents for NVR2820L
Page 1: ...NVR Administrator Guide...
