12
6
.
Fix the camera body to the junction box. Align the arrow to the cable outlet and the four screw holes at the
bottom of the camera will align to those four holes on the junction box. Tighten the screws to fix the camera
body and the junction box.
7
.
Fix the decorative cover. Align the arrow on the decorative cover to the logo and fix the cover.
8
.
Peel off the protective film of the decorative cover and connect the wires and power it on.
[
Note
]
:
After connecting the tail circuit, reserve the ports inside the junction box for better waterproofness.
Summary of Contents for IPC2860-HN-PIR15
