1
During installing and using the device, please follow local electrical safety regulations strictly.
Please use power supply in the safe voltage range of our product
.
Make sure
if
the
power
supply
is
correct
before
running
the
device
.
Please install an easy-to-use breaker during installation and wiring
in
case
it
is
necessary
to
make an
emergency break
.
Please prevent the power cord from being trampled or pressed especially the plug, socket and the connecting
part led out from the device.
Please
connect
cables
of
power
,
alarm
,
audio
and
RS-485
with
the
power
off
.
Hot-line wiring is not allowed.
Do not focus the camera lens on strong light such as the sun or incandescent lamp; otherwise the strong light
will cause overexposure or light leak (not camera malfunction), which may shorten camera lifetime.
Please transport, use and store the device within defined humidity and temperature ranges.
Do not expose it in damp, dusty, extremely hot or cold places or places with intense electromagnetic radiation
or with unstable lighting.
Keep the camera away from water or any liquid
to
avoid
damage
to
internal
components
.
To avoid heat accumulation, please do not block the ventilation around the device.
While shipping the camera, pack it in the factory packing or use materials with equivalent quality.
When shipping, storing and installing the device, try to prevent it from damages caused by pressure, violent
vibration and soaking.
1
.
Power
Supply
2
.
Working
Environment
I. Preface
II. Safety Instruction
Thank you for purchasing our product. If there is any question, please do not hesitate to contact us.
These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss. Please read this Guide carefully before using the product, and keep it properly for future
reference. If the product cannot work normally or is damaged because the user does not follow the safety
instructions, we shall not assume any responsibility. Thanks for your cooperation.
Working
Environment
DC12V±10% / POE, 1.5A
-40
℃
~
+
70
℃
10%~95% (non-condensing)
86kPa~106kPa
-60m~3000m
Voltage
Temp.
Humidity
Altitude
Pressure
Summary of Contents for IPC2860-HN-PIR15
