KEC LSMD-104, Installation Information & Operating Instructions

Page: 22 / 43

TV MENU BUTTON - OPERATIONS
21
(4) FM BROADCAST MODE & FM FREQUENCY
The LSMD-104 has a built-in FM Stereo Broadcast Transmitter to allow you to listen to the audio signal from
the selected program source (TV, DVD, VIDEO1, VIDEO2) through the vehicle's FM radio.
Procedure
1. Press the TV MENU button as many times as necessary to select "FM MODE".
2. Press the button as many times as necessary to set FM MODE as desired to "MODE1",
"MODE2" or "OFF".
3A. If "MODE1" was selected in Step 2 above, press the TV MENU
button again to select "FM FREQ.", then press the
button repeatedly to choose one of the 4 preset FM
Frequencies: 88.3MHz, 88.7MHz, 89.1MHz or 90.3MHz.
-OR-
3B. If "MODE2" was set in Step 2 above, press the TV MENU but-
ton again to select "FM FREQ.", then press the but-
ton to choose any FM Frequency from 88.3MHz to 90.3MHz in
0.1MHz (100KHz) increments.
4. Tune the vehicle's radio to the frequency chosen in Step 3 above.
It may be necessary to repeat Step 3, choosing a different frequency each time, before you are able
to receive a satisfactory signal. The best signal is usually obtained by choosing a frequency that is
not actively broadcasting in your area. Also note that better results may be obtained if the vehicle's
antenna can be lowered independently.
Example - Receiving Audio through the FM Radio at 88.7MHz.
88.7MHz
SCAN
FM
SPEAKER
<CAR RADIO>
NOTES TO INSTALLER
The FM Transmitter Antenna (Page 8 # 22) should be installed in the direction of the vehicle's
main FM Antenna.
Never adjust the LA01 coil on the FM Transmitter board. It was optimally adjusted at the factory.
MENU
Auto Program
CCD : Off
MTS : STEREO
FM Mode
FM Freq.
Language
MENU : Next + -:Sel.
Off
Mode 1
Mode 2
MENU
Auto Program
CCD : Off
MTS : STEREO
FM Mode : Mode 1
FM Freq.
Language
MENU : Next + -: Adj.
88.3MHz
88.7MHz
90.3MHz
MENU
Auto Program
CCD : Off
MTS : STEREO
FM Mode : Mode 1
FM Freq. : 88.7MHz
Language : English
MENU: Next +: Enter