KEC LSMD-104, Installation Information & Operating Instructions

Page: 20 / 43

TV MENU BUTTON - OPERATIONS
19
(1) AUTO PROGRAM
This function allows automatic memorization of all active TV channels in your viewing area. Once
memorized, channels can be selected with the CHANNEL /
buttons on the Remote Control or on
the LSMD-104's Control Panel.
To activate AUTO PROGRAMMING.
Press the TV/Video button as necessary to switch to TV Mode.
Press the MENU Button until "AUTO PROGRAM" is selected.
Press the VOLUME button.
The following display will appear and the channel programming set-up procedure will begin automatically.
All possible channels will be rapidly scanned and all active channels will be memorized.
Note that very weak broadcast signals will not be memorized.
If you wish to stop the Auto Programming procedure before it is finished, press the VOLUME button.
(2) CCD
The LSMD-104 incorporates a Closed Caption Decoder (CCD) to enable viewing of CCD and TEXT
broadcasts.
CCD and TEXT information can only be viewed if they are being broadcat by a television station, or
recorded on a videotape or videodisc.
Press the MENU Button until "CCD" is selected.
Then press the button.
A display of CCD & TEXT channels will appear:
Press the button repeatedly to select the desired CCD or TEXT mode.
You may also use the CCD button on the remote control to cycle through available modes:
Auto Programming
CATV : 5
+Exit
CCD : Off
CCD 1
CCD 2
Text 1
Text 2
Off CCD1 CCD2 TEXT1 TEXT2