ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 34 -
After finishing C12 parameter setting, hold
button
(SW)
shortly to save the
current set values and enter C13 parameter setting interface.
○
C13 ABS brakes of the controller and parameters of anti-charge control
Enter into C13 parameter setting interface, C13 parameter bar flashes.
C13 parameter setting interface
C13 is ABS brakes of the controller and parameters of anti-charge control. The
default value is 0 with the setting range between 0-5, press
(UP) button or
(DOWN) button to make selection.
C13 parameter definition table:
C13 Value
ABS braking strength
Energy recovery efficiency
0
None
None
1
Class 1 braking strength
Best energy recovery
efficiency
2
Class2 braking strength
General energy recovery
efficiency
3
Class 3 braking strength
Weaker energy recovery
efficiency
4
Class4 braking strength
Poor energy recovery
efficiency
5
Class5 braking strength
Bad energy recovery
efficiency
The recommended value of C13 is 1; other values need to be chosen with caution for
use.
Be sure to note:
the higher is the braking intensity level, and the braking strength
will be greater, the greater damage to the motor shaft accordingly.
After finishing the parameter setting of C13, press
(SW) button for short to enter
C14 parameter setting interface.
