Keba ServoOne, Device Help, Page: 8 / 493

11.6.15 Error 14: EtherCAT error 366
11.6.16 Error 15: Parameter error 368
11.6.17 Error 16: Speed difference error 376
11.6.18 Error 17: Position difference error 377
11.6.19 Error 18: Motion control error 377
11.6.20 Error 19: Fatal error 380
11.6.21 Error 20: Hardware limit switch error 386
11.6.22 Error 21: Initialization, common error 387
11.6.23 Error 22: Encoder channel 1, initialization error 393
11.6.24 Error 23: Encoder channel 2, initialization error 403
11.6.25 Error 24: Encoder channel 3, initialization error 404
11.6.26 Error 25: Encoder cyclic process, common error 410
11.6.27 Error 26: Encoder channel 1, cyclic process error 411
11.6.28 Error 28: Encoder channel 3, cyclic process error 412
11.6.29 Error 30: Control initialization error 413
11.6.30 Error 31: PLC error 416
11.6.31 Error 32: Profibus/Profinet error 417
11.6.32 Error 33: Internal timing error 418
11.6.33 Error 34: Powerfail funkction error 420
11.6.34 Error 35: Encoder monitoring error 421
11.6.35 Error 37: Syncronization controller error 427
11.6.36 Error 38: Braking chopper error 427
11.6.37 Error 39: TWIN monitoring error 427
11.6.38 Error 40: Tech option error 430
11.6.39 Error 41: Fast discharge monitoring error (dc-link) 434
11.6.40 Error 43: Ethernet error 435
11.6.41 Error 44: Wire break, common error 435
11.6.42 Error 45: Lock violation error 436
11.6.43 Error 46: Position limit error 438
11.6.44 Error 47: Functional safety, common error 440
11.6.45 Error 49: Safety system error 442
11.6.46 Error 51: Encoder status, common error 450
11.6.47 Error 52: Analog inputs error 450
11.6.48 Error 53: Motor failure error 450
11.6.49 Error 54: Power grid failure error 451
11.6.50 Error 55: Speed guarding error 451
11.6.51 Error 57: POWERLINK error 452
ID No.: 0842.26B.5-01 Date: 09.2020
ServoOne - Device Help
8
Table of contents
11.6.52 Error 58: HYDRAULIK, common error 452
11.6.53 Error 60: Spindle mlamping mystem monitoring error 453
11.6.54 Error 61: End damping error 453
11.6.55 Error 62: Battery buffered encoder 454
11.6.56 Error 63: Error brake monitoring 454
12 Fieldbus 455
12.1 POWERLINK 455
12.2 CANopen / EtherCAT® 456
12.3 Sercos 456
12.4 PROFIBUS / PROFINET 457
12.5 Synchronization / Configuration 457
12.6 EDS file generator 458
13 Technology options (X8) 459
13.1 Selection of modules 459
13.2 Second SinCos encoder 460
13.3 SinCos encoder 460
13.4 TTL with encoder simulation 461
13.5 SSI encoder simulation 461
13.5.1 Parameters 461
13.6 DIO option 462
13.7 MIO option 462
13.8 TwinSync 463
14 Device status 464
14.1 Device status 464
14.2 Status bits 465
14.3 Load factor 466
15 Manual mode 467
15.1 Manual mode window 467
15.2 Manual mode control status 471