48
1
Operation Manual Supply Unit SO CM-P BG1+2
ID no.: 1400.201B.5-00 Date: 02/2020
Climatic conditions
ServoOne CM-P supply unit
In storage
As per EN 61800-2, IEC 60721-3-1 classes 1K3 and 1K4
2)
Temperature
-25 °C to +55 °C
Relative atmospheric humidity
5 to 95 %
In operation
As per EN 61800-2, IEC 60721-3-3 class 3K3
3)
Temperature
Air cooling
5 °C to +40 °C
Relative atmospheric humidity
5 to 85 % without condensation
1) The absolute humidity is limited to max. 60 g/m³. This means, at 70 °C for example, that the relative atmospheric humidity
may only be max. 40 %.
2) The absolute humidity is limited to max. 29 g/m³. So the maximum values for temperature and relative atmospheric humidity
stipulated in the table must not occur simultaneously.
3) The absolute humidity is limited to max. 25 g/m³. That means that the maximum values for temperature and relative atmos-
pheric humidity stipulated in the table must not occur simultaneously.
Table A.6
Climatic conditions, supply unit ServoOne CM-P
NOTE:
The climatic conditions apply to the device. For this reason they must also be
met in the switch cabinet.
Mechanical conditions
ServoOne CM-P supply unit
Vibration limit in transit
As per EN 61800-2, IEC 60721-3-2 class 2M1
Frequency [Hz]
Amplitude [mm]
Acceleration [m/s²]
2 < f < 9
3.5
Not applicable
9 < f < 200
Not applicable
10
200 < f < 500
Not applicable
15
Shock limit in transit
As per EN 61800-2, IEC 60721-3-2 class 2M1
Drop height of packed device max. 0.25 m
1)
Note: The devices are only designed for stationary use.
Table A.7
Mechanical conditions, ServoOne CM-P
Mechanical conditions
ServoOne CM-P supply unit
Vibration limits for the
system
1)
As per EN 61800-2, IEC 60721-3-3 class 3M1
Frequency [Hz]
Amplitude [mm]
Acceleration [m/s²]
2 < f < 9
0.3
Not applicable
9 < f < 200
Not applicable
1
1)
Note: The devices are only designed for stationary use.
Table A.7
Mechanical conditions, ServoOne CM-P
CAUTION!
DAMAGE TO THE DEVICE DUE TO INCORRECT OPERATION!
Failure to observe the ambient conditions may result in damage.
x
No continuous vibration!
The axis controllers must not be installed in areas where they would be permanently
exposed to vibration.
x
Switch cabinet min. IP54 for STO! as per EN ISO 13849-2
x
Observe cooling conditions!
NOTE
:
The devices are only designed for stationary use.
