1
Introduction
1.1
Purpose of the document
This document describes the structure of the TM 240/A
(temperature module).
1.2
Preconditions
This document contains information for persons with the following skills:
Target group
Knowledge and skills pre-requirement
Project engineer
Basic technical training (University of Applied Science/University level,
engineering degree or corresponding professional experience).
Knowledge in:
●
working mode of a PLC,
●
safety regulations,
●
the application.
Operator
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
●
safety regulations,
●
working mode of machine or plant,
●
principal functions of the application,
●
system analysis and troubleshooting,
●
setting options at the operating installations.
Service technician
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
●
working mode of a PLC,
●
safety regulations,
●
working mode of machine or plant,
●
diagnosis possibilities,
●
systematic error analysis and rectification.
1.3
Intended use
The TM 240/A was developed for control applications in industrial machines.
The typical applications areas include injection molding machines, robots,
presses, machine tools and similar.
The TM 240/A may only be used for the types of use described in the technical
descriptions and only in conjunction with recommended/approved third-party
equipment/installations.
TM 240/A, TE 220/A for KeStudio U3
Introduction
© KEBA 2011
Project engineering manual V1.10
7
Summary of Contents for Kemro TM 240/A
Page 4: ......
