4.3.1
Connection example
Fig.4-3:
Connection example for encoder inputs
Information
●
The terminal 0 V determine the reference potential for the encoder inputs.
●
To run the rotary encoders, it is necessary to supply the MM 280/A via
the terminals 0 V and 24 V.
Power supply is via the 24 V terminal at the front. The 24 V are looped through
secured. In addition, 5 V are generated internally from the 24 V. The 5 V trans-
ducer supply can carry loads of up to 100 mA each.
Connections and wiring
MM 280/A
© KEBA 2011
Project engineering manual 1.04
16
Summary of Contents for Kemro MM 280/A
Page 4: ......