P30
Authorization
Operating instructions V3.22
18
© KEBA
5.2.1
Preparing the charging station
To teach in the RFID master card and to delete the taught-in RFID cards, the
charging station must be rebooted via the service button. To access the ser-
vice button, proceed as follows:
1) Unscrew the two screws on the bottom of the housing cover
1
.
2) Lift the housing cover at bottom max. 1 cm
1
and then push upwards
2
.
3) Unscrew the four screws of the connection panel cover
1
and remove
the connection panel cover upwards.
