31
ANTRIEBSTECHNIK
COMBIVERT F0
Um eingegebene Werte zu speichern, muß ENTER zweimal betä-
tigt werden.
Press the ENTER-key twice to store the entered values.
FUNCT
Out 1
Out 2
DOWN
UP
Störmelde- / Runsignal reagiert auf jeden Fehler
Fault / run signal reacts to every error
Reagiert nicht auf Fehler "UP" (Unterspannung)
Does not react to error "UP" (undervoltage)
Überlast-Vorwarnung löst aus, wenn 10 % der Abschaltzeit überschritten werden.
Overload warning is triggered when 10 % of the switch-off time are exceeded.
Übertemperatur-Vorwarnung löst aus, wenn 10% der Abschaltzeit überschritten werden (Abschaltzeit: P.21).
Overtemperature warning is triggered when 10% of the switch-off time are exceeded (switch-off time: P.21).
Strom > Out1 / Out2 - Auslastungspegel 1/2 (L.2 / L.3)
Current > Out1 / Out2 - Load level 1/2 (L.2 /L.3)
Istfrequenz < Sollfrequenz
Actual frequency < Set frequency
Istfrequenz > Sollfrequenz
Actual frequency > Set frequency
Istfrequenz = Sollfrequenz
Voreinstellung für Out2 in Satz 0…3
Actual frequency = Set frequency
Presetting
for Out2 in set 0…3
Istfrequenz < Out1 / Out2 - Istwertpegel 1/2 (L.0/L.1).
Actual frequency < Out1 / Out2 - Actual value level 1/2 (L.0/L.1).
Istfrequenz < Out1 / Out2 - Istwertpegel 1/2 (L.0/L.1), Ausnahme bei Speed Search.
Actual frequency < Out1 / Out2 - Actual value level 1/2 (L.0/L.1), exception at Speed Search.
Istfrequenz > Out1 / Out2 - Istwertpegel 1/2 (L.0/L.1)
Actual frequency > Out1 / Out2 - Actual value level 1/2 (L.0/L.1)
Istfrequenz = Out1 / Out2 - Istwertpegel 1/2 (L.0/L.1)
Actual frequency = Out1 / Out2 - Actual value level 1/2 (L.0/L.1)
Sollfrequenz < Out1 / Out2 - Istwertpegel 1/2 (L.0/L.1)
Set frequency < Out1 / Out2 - Actual value level 1/2 (L.0/L.1)
Sollfrequenz > Out1 / Out2 - Istwertpegel 1/2 (L.0/L.1)
Set frequency > Out1 / Out2 - Actual value level 1/2 (L.0/L.1)
Timer aus L.16 und L.17 aktiviert Out1/Out2 (Einschaltverzögerung s.S. 56)
Timer of L.16 and L.17 activates Out1/Out2 (switch-on delay see page 56)
Istfrequenz > Istwertpegel 1/2 (L.0/L.1) UND Istdrehrichtung = gesetzte Drehrichtung
Actual frequency > Actual value level 1/2 (L.0/L.1) Actual rotation direction = set rotation direction
Voreinstellung für Out1 in Satz 0…6
für Out2 in Satz 4…6
Presetting
for Out1 in set 0…6
for Out2 in set 4…6
Summary of Contents for COMBIVERT F0
Page 130: ...130 ...