GB - 26
CP.30 Analog output 1 / function
CP.30 defines the function of analog output 1. The output at the analog output is always
made in a range of 0…+10 V. Negative values are inverted and the output is displayed in
a positive value.
Value Function
Scaling factor
0…100 % (0…±100 %)
0
Absolute actual frequency CP.1
0…100 Hz
1
Absolute set frequency CP.2
0…100 Hz
2
Actual frequency CP.1
0…±100 Hz
3
Set frequency CP. 2
0…±100 Hz
4
Output voltage CP.9
0…500 V
5
DC link voltage CP.7
0…1000 V
6
Apparent current CP.4
0…2 • rated current
7
Active current ru.17
0…2 • ±rated current
8…10
reserved
–
11
Absolute active current ru.17
0…2 • rated current
12
Power stage temperature ru.38
0…100 °C
13…21
reserved
–
22
Analog input before amplification (ru.27)
0…100 %
23
Analog input after amplification (ru.28)
0…400 %
24…25
reserved
–
26
Active power ru.81
0…±2 • Rated power
CP.32 Transistor output / function (term. X2A.10)
The switching level of CP.32 is pre-set to 4,00. Value range see CP.33.
CP.33 Relay output 1 / function (terminals X2A.11...13)
The switching level of CP.33 is adjusted by CP.34.
Value Function
0
No function (generally off)
1
Generally on
2
Run signal; also by DC-braking
3
Ready signal (no error)
4
Fault relay
5
Fault relay (without auto-reset)
6
Warning or error message at abnormal stopping
7
Overload pre-warning (OL)
8
Overtemperature pre-warning (OH)
9
External overtemperature
10
Motor protection pre-warning (OH2)
11
Interior temperature pre-warning (OHI)
12
Cable breakage 4...20 mA on analog input 1
14
max. constant current (Stall, CP.25) exceeded
15
max. ramp current (LA-Stop, CP.24) exceeded
16
DC-braking active
20
Actual value = set value (CP.3 = Fcon; rcon; not at noP, LS, error, SSF)
21
Accelerate (CP.3=FAcc, rAcc, LAS)
22
Decelerate (CP.3 = FdEc, rdEc, LdS)
further on next side
