4.3.2 EtherCat system bus terminal X4b
The EtherCAT system bus serves for the communication of the master with the axis
modules and the power supply and regenerative unit. „CanOpen over EtherCAT “ is
used as protocol. Upto eight axes can be operated isochron with a cycle time of <250 µs.
Description of the LEDs
RJ45 socket
Assignment
LED green
Link
1
8
X4C
EtherCAT
OUT
1
TX+
2
TX-
off
Connection off
3
RX+
flashing
Communication
4
–
on
Connection on
5
–
LED yellow
Speed
1
8
X4B
EtherCAT
IN
6
RX-
7
–
off
10 MBit
8
–
on
100 Mbit
Table 14: EtherCat System bus socket X4B
4.3.3 Diagnosis / visualisation X4A
The integrated RS232/485 interface serves for the connection of service tools (e.g.
COMBIVIS) and displays. Telegram DIN66019II is used as communication protocol.
Interface
Standard
Connecting cable
RS485
TIA/EIA-485 and ISO 8482
RS232
ANSI TIA/EIA-232
0058025-001D and
if necessary USB
serial converter
Table 15: Diagnosis / Visualisation X4A
ATTENTION
The diagnostic interface is not electrically isolated, it has the same
potential as control potential.
47
CONNECTION OF THE CONTROL
Summary of Contents for COMBIVERT 19H6 Series
Page 2: ......